行业新闻
The difference between amorphous powder core and high-efficiency amorphous powder core
Features and uses of amorphous powder core: 1. Features: Excellent DC superposition characteristics high magnetic flux density Low high frequency loss low cost 2. Purpose: High-power power supply AC output reactor PFC choke coil flyback transformer differential mode filter Temperature stabilization filter Features and uses of high-efficiency amorphous powder core: 1. Features: good temperature stabi
阅读更多
Why not use silicon steel sheet for amorphous alloy transformer?
The amorphous alloy is solidified by super rapid cooling. When the alloy solidifies, the atoms have no time to arrange and crystallize orderly. The solid alloy obtained is a long-range disordered structure, and there are no grains and grain boundaries of the crystalline alloy. This amorphous alloy has many unique properties. Because of its excellent properties and simple process, it has become the focus of research
阅读更多
Amorphous iron core | Advantages of amorphous alloy three-dimensional wound iron core transformer
Amorphous alloy three-dimensional wound iron core transformer mainly has the following advantages: The amorphous alloy three-dimensional wound iron core is composed of three single frames. Each single frame is formed by continuous winding of amorphous strips. The amorphous strips are tightly wound, closed structure, and there is no overlapping and overlapping air gap. The iron core adopts the overall curing technolo
阅读更多
Vehicle amorphous demand soars
In recent years, with the development of emerging markets, the application market of amorphous and nanocrystalline has gradually widened, and even become the first choice of soft magnetic materials in some fields. At present, common mode inductors, high-power switching power supplies, sensors, transformers, inverters and other products can be made of amorphous and nanocrystalline materials, and the amount is large.
阅读更多
Manufacturing technology of three-dimensional amorphous iron core
1. Slitting and cutting. In the past, amorphous materials were cut in a straight line. Around 2015, some manufacturers have started the application of relevant prototypes. The principle is to cut the amorphous strip in a straight line according to the designed core section, which is somewhat similar to the section of our laminated step core, which can be met by conventional amorphous straight-line cutting equipmen
阅读更多