Amorphous alloy three-dimensional wound iron core transformer mainly has the following advantages:
The amorphous alloy three-dimensional wound iron core is composed of three single frames. Each single frame is formed by continuous winding of amorphous strips. The amorphous strips are tightly wound, closed structure, and there is no overlapping and overlapping air gap. The iron core adopts the overall curing technology. After curing, the iron core forms a complete rigid body with high strength. In the production process, the iron core does not need to be opened and assembled, and there are almost no fragments.
Relatively speaking, for amorphous alloy flat rolled iron core, whether it is three frame and three column iron core or four frame and five column iron core, each iron core frame needs to open the assembly coil, lap the iron core, and stick it with epoxy adhesive. Fragments will certainly be produced in this process, and the product quality has very high requirements for the process of iron core lapping. Otherwise, more debris may be generated at the lap joint due to vibration during transportation and operation.
Therefore, from the perspective of product stability, the advantage of closed amorphous alloy three-dimensional rolled iron core with high strength is obvious.
The amorphous alloy three-dimensional wound iron core is composed of three single frames. Each single frame is formed by continuous winding of amorphous strips. The amorphous strips are tightly wound, closed structure, and there is no overlapping and overlapping air gap. The iron core adopts the overall curing technology. After curing, the iron core forms a complete rigid body with high strength. In the production process, the iron core does not need to be opened and assembled, and there are almost no fragments.
Relatively speaking, for amorphous alloy flat rolled iron core, whether it is three frame and three column iron core or four frame and five column iron core, each iron core frame needs to open the assembly coil, lap the iron core, and stick it with epoxy adhesive. Fragments will certainly be produced in this process, and the product quality has very high requirements for the process of iron core lapping. Otherwise, more debris may be generated at the lap joint due to vibration during transportation and operation.
Therefore, from the perspective of product stability, the advantage of closed amorphous alloy three-dimensional rolled iron core with high strength is obvious.